Delay start
28
To select delay start
With delay start you can delay the start
of the programme by up to a maximum
of 24 hours.
However:
delay start cannot be used
with the
Warm air
programme.
After selecting the programme touch
the
sensor.
–
will flash
– Times of up to
are selected in
minute stages and then in hour
stages up to
.
– If you touch the sensor continuously,
the time will count up to
.
– Touching the
sensor again when
shows in the display will delete
the time selected.
To begin delay start
Press the
Start/Stop
button.
–
will light up
– Delay start times of more than
will
count down in hours and then in
minutes until the start of the pro-
gramme.
– The drum will turn briefly every hour
until the start of the programme to re-
duce creasing.
To change delay start after it
has started counting down
Press the
Start/Stop
button.
–
will flash
Touch the
sensor to change the
time.
Press the
Start/Stop
button.
To add/remove laundry after
delay start has started count-
ing down
You can open the door to add/re-
move laundry.
– All programme settings will be saved
–
will flash
You can also change the drying level, if
required.
Press the
Start/Stop
button so that
the delay start time continues to
count down.
To cancel delay start
Switch the dryer off and then on
again.
