Operating the tumble dryer
18
Display
g
Time display
The programme duration remaining
will be displayed in hours : minutes.
The duration displayed for the
Cot-
tons, Minimum iron, Delicates, Out-
erwear, Proofing, Denim, Gentle
smoothing
programmes may vary or
"jump". The following factors,
among others, affect the programme
duration displayed: the quantity of
laundry, the type of fabric and the
residual moisture in the laundry. The
electronics continually assess condi-
tions in the appliance and then ad-
just the programme duration with in-
creasing accuracy.
h
Check/fault indicators
These are only visible when neces-
sary.
...
... empty the condensed water con-
tainer or check the drain hose
...
... clean the plinth filter/airways
...
... technical fault, call the Service
Department
i
Drying level display
For selecting the drying level for pro-
grammes with a selectable drying
level. See "
sensor".
j
sensor
This sensor has two functions.
Touching the symbol will . . .
. . . select a later start time for the
programme (delay start).
will flash
during selection,
will light up
constantly when the delay start time
is counting down.
. . . select the duration of the
Warm
air
programme.
will flash during
selection.
k
Perfect Dry
indicator
With programmes with a selectable
drying level, the Perfect Dry system
calculates the residual moisture
present in the laundry to ensure a
precise drying result.
The
Perfect Dry
indicator . . .
. . . will flash after the programme
has started and go out when the
programme duration appears in the
display.
. . . will light up again when the se-
lected drying level is reached and re-
main on until the end of the pro-
gramme.
. . . will remain dark with the follow-
ing programmes:
Woollens hand-
care, Warm air.
l
sensor
Touching this symbol will select the
drying level required which will then
light up
.