Miele TKB 350 WP Скачать руководство пользователя страница 26

Страница: 26 / 76

4. Removing the laundry at the end of the programme

End of programme/Anti-crease

At the end of the programme:



will

light up in the display and the

Start/

Stop

button will go out. The anti-crease

function, if selected, will then switch on

for a maximum of 2 hours.
10 minutes after the end of the

programme the

Start/Stop

button will

begin to flash slowly and the display

will go out: the appliance is in Standby

mode to save energy.
The dryer will switch off automatically

15 minutes after the end of the anti-

crease phase (with programmes without

an anti-crease phase it will switch off

15 minutes after the end of the

programme).

Removing the laundry



Never

open the door before the

drying process has finished.



Reach under the door grip and pull

the door open.



Remove the laundry.

Check that all items have been

removed from the drum.
If items are left in the dryer, they

could be damaged by overdrying

when the dryer is next used.

If the dryer is switched on at the mains

and the door is opened, the drum

lighting will come on. It will go out a few

minutes later to save energy.



If the dryer is still switched on, switch

it off with the



button.

A buzzer will sound.



Remove the fluff from the 2 fluff filters

in the door opening (see "Cleaning

and care - Fluff filters").



Shut the door with a gentle swing.



Empty the condensed water

container.

Содержание TKB 350 WP













































































Результаты поиска

Содержание TKB 350 WP

Отзывы:

Похожие инструкции для TKB 350 WP

Бренды по названию

Популярные бренды

Miele TKB 350 WP, Руководство по эксплуатации

Результаты поиска

Содержание TKB 350 WP

Отзывы:

Похожие инструкции для TKB 350 WP

Бренды по названию

Популярные бренды