Settings
93
Conductivity
This setting is only relevant for regions
with very soft water.
Very soft water can result in unsatis-
factory drying results.
You should only select this setting if
the water used for washing the laun-
dry is extremely soft with a conduct-
ivity reading (electrical conductivity)
less than 150 μS/cm. Contact your
local water authority for the conduct-
ivity level of your mains water supply.
Selection
-
Normal
(factory default setting)
-
Low <150ms
(only for regions with
very soft water)
Consumption data
You can view information about the
energy consumption of your tumble
dryer with the
sensor. Various in-
formation can be shown in the display.
Options
-
Estim. + Consump.
(factory default)
– Indicates the estimated energy
consumption before the pro-
gramme starts
– Indicates the energy consumption
once the programme starts
-
Estimate
Only indicates the estimated energy
consumption before the programme
starts
When this option is activated,
Con-
sumption
is no longer shown in the
display.
Consumption
You can display the total consump-
tion.
Selection
-
Previous programme
Displays energy consumption in the
last programme run
-
Total consumption
Displays the total consumption to
date
-
Reset function
Deletes the total consumption to date
Содержание TEL 785 WP
Страница 100: ...M Nr 11 892 090 01 en GB TEL 785 WP ...