Problem
Possible cause
Remedy
There are humming
noises.
The compressor is
operating.
None. These noises are quite
normal and do not indicate a
fault.
The display is dark.
The programme
selector is not lit up.
The Start/Stop button
light flashes slowly.
The display has
switched off
automatically to save
energy (Standby
mode).
The light of the
programme selector
goes out when
selecting
Settings
J
.
The display will light up when
one of the buttons is pressed.
The Start/Stop
indicator light
flashes/does not flash.
The flashing indicates
that a programme can
be started.
After the programme has
started, the flashing will
change to a constant light.
A programme cannot
be started.
There is no immediate
cause.
– Is the dryer switched on?
– Is the mains plug plugged
in?
– Is the door closed
properly?
– Has the fuse or circuit
breaker tripped?
– If you cannot remedy the
problem, there is a fault.
Call Miele.
Power cut.
When power is restored to the tumble dryer after a
power cut, the programme will continue automatically.
The display is in a
different language.
A different language
has been selected.
Set the language you want.
The
flag symbol
J
will guide
you.
The interior drum
lighting is not
switched on.
The lighting switches
off automatically (to
save energy).
– Switch the dryer off and
then on again.
– If the lamp needs to be
replaced, follow the
instructions in "Changing
the lamp" at the end of this
section.
Problem solving guide
44
Содержание T 8929 WP
Страница 62: ...62 ...
Страница 63: ...63 ...
Страница 64: ...M Nr 09 148 200 01 Alteration rights reserved 3312 ...