
Problem
Possible cause
Remedy
The following
message
appears after
the programme
has finished:
Clean fluff filters
Air is not flowing freely
through the dryer.
–
The dryer is not working
efficiently or
economically.
–
Possible causes: The fluff
filters are clogged with
fluff or with detergent
residues.
–
Clean the fluff filters.
If they need to be cleaned
with water, make sure they
are completely dry before
replacing them.
–
See also the notes on the
next page under: "The drying
process goes on too long or
even switches off".
To delete the fault message:
–
Switch the dryer off and then
back on again.
You can adjust the setting
which controls when or if
the message
Clean fluff
filters
appears.
See Settings menu
J
, Airways
indicator section.
,
TECHNICAL
FAULT
Call Service
Dept
No obvious cause.
In some circumstances,
Clean fluff filters
will already
have been displayed.
–
Clean the fluff filters and the
condenser unit.
To delete the fault message:
–
Switch the dryer off and then
back on again.
There is a fault, if despite
doing this, the programme
is cancelled and the fault
message appears again.
Contact the Miele Service
Department.
i
Programme
change not
possible
An attempt has been made
to alter a programme while
it is in progress.
You will need to cancel the
current programme before you
can select a new one.
Problem solving guide
30