Miele T 4123, Руководство по эксплуатации

Страница: 20 / 44

Problem Possible cause Remedy
The drying
process goes on
too long or even
switches off. Important : Before attempting to remedy one of the following
causes, switch the dryer off and switch on again to start the
programme again.
Ventilation to the dryer is
insufficient (e.g because it is
installed in a room which is
too small). Open a door or window while
the machine is in operation
for increased air flow.
The fluff filter may be
blocked. Remove any fluff.
The laundry has not been
spun sufficiently. Make sure that your laundry
is thoroughly spun at highest
spin speed for the type of
fabric.
The tumble dryer has been
overloaded. Do not exceed the maximum
load for the programme
selected.
Metallic components, e.g.
zips have prevented the
dryer from registering the
correct moisture level in the
laundry. – Close zips and fasten any
hooks next time.
If the problem occurs again,
dry garments with long zips
using "Timed drying - Warm
air".
The vent ducting or the
ventilation outlet is blocked; – Check all parts of the
extraction system on a
regular basis (e.g. wall
vent, external grille, bends
in the ducting etc.) and
make sure they are all free
of any hindrance.
–
Remove any fluff.
Problem solving guide
20