Miele STB 20, Руководство по эксплуатации, Страница: 72 / 84

,
Always turn the vacuum cleaner
off before cleaning or maintenance
work on the handheld Turbobrush,
and pull the plug from the electrical
outlet.
Removing threads and hairs
^
With a pair of scissors, cut any thre-
ads or hairs that have become entan-
gled on the brush roller. To guide the
scissors, move along the guide track
in the roller.
^
Then run the vacuum cleaner to va-
cuum up the pieces.
For more stubborn dirt or blockages in-
side the handheld Turbobrush, the co-
ver can be opened. Any large particles
inside it can then be easily removed.
^
Press the release button and remove
the service flap opposite it.
^
Remove any dirt adhering to the insi-
de of the casing and the roller brush.
^
Put the service flap back on.
Changing the thread collector
When the pile is worn replace the thre-
ad catcher located at the suction hole
of the handheld Turbobrush.
^
Using a knife or similar object remo-
ve the thread catcher pads from the
slots at the red markings on the side.
^
Press the new thread catcher into the
slots.
en (USA) - Cleaning and care
72