Miele SmartLine CS 7612 Скачать руководство пользователя

Страница: 45 / 77

Imp

ort

plia

nce

s.c

THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.

Problem solving guide

Problem

Cause and remedy

After the SmartLine ele-
ment has been
switched on or a sensor
control has been
touched,



appears in

the timer display for a
few seconds.

The system lock or safety lock is activated.



Deactivate the system lock or safety lock (see
“System lock / Safety lock”).

The SmartLine element
has switched off auto-
matically. When the ele-
ment is switched back
on,



appears above the

On/Off sensor con-
trol



One or more of the sensor controls are covered, e.g.
by finger contact, food boiling over or an object.



Clean off any dirt and/or remove the object (see
“Safety features” – “Safety switch-off”).

After the SmartLine ele-
ment has been
switched on



appears

in the timer display for a
short while. The Smart-
Line element does not
heat up.

The SmartLine element is in demonstration mode.



Touch the 0 and 2 sensor controls at the same
time until



flashes alternately with



in the

timer display.

A cooking zone
switches off automatic-
ally.

It has been operated for too long.



You can use the cooking zone again by switching
it back on (see “Safety switch-off”).

A cooking zone or the
whole hob switches off
automatically.

The overheating protection mechanism has been ac-
tivated.



See “Safety features”.

The Booster has deac-
tivated early automatic-
ally.

The overheating protection mechanism has been ac-
tivated.



See "Safety features".

The cooking zone is not
working in the usual
way on the power set-
ting selected.

The overheating protection mechanism has been ac-
tivated.



See "Safety features".

Содержание SmartLine CS 7612














































































Результаты поиска

Содержание SmartLine CS 7612

Отзывы:

Похожие инструкции для SmartLine CS 7612

Бренды по названию

Популярные бренды

Miele SmartLine CS 7612, Руководство пользователя

Результаты поиска

Содержание SmartLine CS 7612

Отзывы:

Похожие инструкции для SmartLine CS 7612

Бренды по названию

Популярные бренды