Replacing the "Active HEPA"
filter
^
Open the dust compartment lid.
Do not use more than one filter at a
time.
^
Lift and remove the filter.
^
Insert a new filter and press it
downwards.
If you wish to replace the Air Clean
filter with an Active Air Clean filter or
Active HEPA filter see "Maintenance
and care - Exchanging exhaust
filters".
^
Close the dust compartment lid firmly
until it clicks into place.
Resetting the filter change indicator
The filter change indicator (Reset
button) must be reset each time the
filter is replaced. To do this, the
vacuum cleaner must be plugged in.
^
Press and hold the filter change
indicator light until it goes out.
The display is now reset.
The indicator is only reset if pressed
while lit. If the indicator is pressed
while not lit, it will not be reset.
Maintenance and care
27
Содержание S 5981 PowerPlus
Страница 2: ...2 ...
Страница 8: ...Guide to the vacuum cleaner 8 ...