Miele PWM 908, Инструкции по эксплуатации и монтажу

Страница: 21 / 104

Before using for the first time
21
Reference to external appli-
ances
A reference to external hardware ap-
pears.
 Confirm with the OK sensor control.
Before initial commissioning, connect
the XCI box or slide a communication
module into the slot on the back of the
washing machine. The washing ma-
chine must be disconnected from the
mains. Then start the commissioning
process.
Setting the display brightness
You will be asked to select the bright-
ness of the display.
Display brightness
Darker
Brighter
OK
 Touch the segment bars until you
reach the required level of brightness.
The selected brightness level will be
highlighted orange.

Confirm with OK .
The display will change to the next set-
ting.
Setting the date
OK
Date
25
24
22
21 2021
2020
2019 23 July
August
September
June
May
2018
2017

Place your finger on the number that
you want to change and move your
finger in the direction you want.

Once all values have been selected,
confirm with the
OK sensor control.
The display will change to the next set-
ting.
Confirm time request
The following question appears in the
display:
Should the clock display not be shown?
 Touch the sensor control yes or no .
If you select yes , the system will skip
the setting Clock display .
If you select no , the display will switch
to the setting Clock display .