Miele PWM 506 Mop Star 60 Скачать руководство пользователя страница 44

Страница: 44 / 84

Changing the programme sequence

Changing a programme

After the start of a programme, it is no
longer possible to select a different pro-
gramme.

You will need to cancel the current pro-
gramme before you can select a new
one.

Programme cannot be changed

appears

in the display if the programme se-
lector has been moved. The text dis-
appears when the programme selector
is set to the original programme.

Cancelling a programme

You can cancel a wash programme at
any time after it has started.

Disinfection programmes can only be
cancelled with a PIN code.



Touch the

Start/Stop

sensor.



Select

Cancel programme

The suds will be pumped away. The
programme is cancelled. The door lock
is released.



Pull open the door.



Remove the laundry.

If you want to select a different pro-
gramme:



Close the door.



Select the programme you want.



Add detergent to the detergent dis-
penser drawer, if necessary.



Touch the

Start/Stop

sensor.

The new programme will begin.

Switching on the washing ma-
chine after an interruption to
the power supply

If the washing machine is switched off
with the



button during a wash pro-

gramme, the programme will be inter-
rupted.



Switch the washing machine back on
with the



button.



Note the message in the display.



Touch the

Start/Stop

sensor.

The programme will also be interrupted
if power is interrupted by a power cut.



When power is resumed, confirm the
message in the display with



Touch the

Start/Stop

sensor.

The programme continues.

Содержание PWM 506 Mop Star 60





















































































Результаты поиска

Содержание PWM 506 Mop Star 60

Отзывы:

Похожие инструкции для PWM 506 Mop Star 60

Бренды по названию

Популярные бренды

Miele PWM 506 Mop Star 60, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание PWM 506 Mop Star 60

Отзывы:

Похожие инструкции для PWM 506 Mop Star 60

Бренды по названию

Популярные бренды