Peak load cut-out
If the peak-load cut out function is activated
the heating will switch itself off and any
programme running will be stopped. The
following message will appear in the display:
7
Cottons
Prog. stopped. Peak load cut-out.
Programme will continue.
i
ü
f
Once the peak load has finished the
programme will continue automatically as
before.
Communication module
This machine can be linked to a PC via a
communication module.
The shaft for the communication module is
located on the side of the machine.
An editor programme is available from Miele.
Operating data
By pressing the
\
"Operating data" button
the operating data module can be used to
read or delete operating data either before
the start of a programme, or after it has
finished.
7
Cottons
90 °C
8
Cottons
60 °C
9
Cottons intensive
60 °C
i
\
FC
A
After pressing the
\
button the following
will appear in the display:
Operating data module
Total data
Programme data
e
\
A
Selection choice:
–
Total data
In this option all programme data is collated
and summarised.
–
Programme data
Programme data contains all the data called
up during a programme.
–
Delete data
- Module (Total data including programme
data)
- Total data (only delete total data)
- Programme data (only delete programme
data)
Pressing the button again deselects the
\
"Operating data" option.
If there is no more memory available in the
operating data module a message will
appear after pressing the START button to
say that the operating data will be
overwritten.
If you press the
A
"Back" button or do not
press the START button within 30 seconds
the display will revert to the way it was
before starting the programme.
Optional modules
29
