Miele PW 6065 OS Скачать руководство пользователя страница 77

Страница: 77 / 80

Demo programme

This can be used by dealers to
demonstrate the machine in their
showrooms.

When

is selected, the machine can

be used, depending on its
programmable status, but it is not
possible to start a programme.

No deterg.

This option is visible in the display
but not available on this machine.

Temp. reduction

At altitudes over 3000 m the suds
temperature for the Cottons
programmes can be reduced by 5°C
to prevent it boiling too early.

The machine is delivered with this
option deactivated.

Controls

This setting must not be altered on
this machine.

The option

D no shortcut keys

must be

selected for this machine (default
setting).

Caution

: If a different option is

activated by mistake you will not be
able to open the

Supervisor level

Should this happen please contact
the Miele Service Department.

Delay start

This option is visible in the display
but not available on this machine.

To close the Settings menu

Select

Back

and confirm your selection.

The display will return to the entry
menu.

Settings/Supervisor level menu

Содержание PW 6065 OS

















































































Результаты поиска

Содержание PW 6065 OS

Отзывы:

Похожие инструкции для PW 6065 OS

Бренды по названию

Популярные бренды

Miele PW 6065 OS, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание PW 6065 OS

Отзывы:

Похожие инструкции для PW 6065 OS

Бренды по названию

Популярные бренды