Miele PUR 98 D Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 48

Miele PUR 98 D Скачать руководство пользователя страница 6

Warning and Safety instructions

6



Tampering with electrical connections or components and

mechanical parts is highly dangerous to the user and can cause
operational faults.
Only open the housing as described in the instructions given in the
installation sheet and in the “Cleaning and care” section of this
booklet. Under no circumstances should any other parts of the
housing be opened.



Faulty components must only be replaced by genuine Miele spare

parts. The manufacturer can only guarantee the safety of the
appliance when Miele replacement parts are used.



During installation, maintenance and repair work, the appliance

must be disconnected from the mains electricity supply. It is only
completely isolated from the electricity supply when:

- the mains circuit breaker is switched off, or

- it is switched off at the wall socket and the plug is withdrawn from

the socket. Do not pull the mains connection cable but the mains
plug to disconnect your appliance from the mains electricity
supply.

«
...
4
5
6
7
8
...
»

Содержание PUR 98 D

















































Отзывы:

Нет отзывов