Miele PT 8407 EL, План установки

Страница: 11 / 15

Technical datasheet
Tumble dryer:
Heating:
PT 8407
Electric (EL)
Legend:
Abbreviations in bold type:
Connection required
en-CA
Abbreviations in circle with dashes:
Connection optional or required depending on model version
Optional extras:
BS
Concrete base Quality and density of concrete must comply with load.
Concrete base must be firmly secured to floor!
Recommended height 3 15/16“ 100 mm
Minimum height 2“ 50 mm
Width min. 35 7/16“ 900 mm
Depth min. 47 ¼“ 1200 mm
Machine connections:
Electrical
connection
1. Standard voltage (as supplied) V 3 AC 208
Frequency Hz 60
Rated load kW 19.7
Fuse rating A 3 x 65
Connection cable supplied without
power cord
Cable screw connector M 40
2. Standard voltage (convertible) V 3 AC 220 – 240
Frequency Hz 60
Rated load kW 21.9 – 25.8
Fuse rating A 3 x 65
Connection cable supplied without
power cord
Cable screw connector M 40
Electrical connection must comply with national regulations.
Connection using multi-pole lockable wall socket in
compliance with IEC/EN 60309 and IEC/EN 60947 is
recommended in order to simplify electrical tests. If machines
are hard-wired, a multi-pole mains switch must be provided
on site. Switches with a contact gap of more than 3 mm can
be used. These include switches, fuses and contactors
(IEC/EN 60947). A wall socket or mains isolator must be
easily accessible after installation.
Reinstallation of the supply point, changes to the equipment
or checks on the protective conductor, including determination
of correct fuse rating, should only be performed by a properly
trained electrician.
If necessary, equipotential bonding with good galvanic contact
must be provided in accordance with all appropriate national
and local regulations.
Installation plan: PT 8407 EL (Electric)
Date: 01.2015 Page: 11