Miele PT 8303 SL EL, План установки

Страница: 12 / 14

Air intake Standard connection: Air intake from installation site
Min. air intake cross-section (to prevent draughts in room) 83 in² 531 cm²
A sufficient supply of fresh air should be ensured to replace
the air extracted.
Alternative connection: Ducted air intake (from outside
building)
Connector on machine (int. diameter) 6 5/16“ 161 mm
Connection pipe provided on site (ext. diameter) 6 5/16“ 160 mm
Lid removal exposes live components! For safety reasons,
the pipe connected for central air intake should be at least
900 mm (35 7/16”) long and secured using two screws.
Fittings
(supplied)
Without base
2 × clamps
2 × screws DIN 571 (Ø × length)
¼ x 1 9/16“ 6 × 40 mm
2 × rawl plugs (Ø × length) 3/8 x 2“ 10 × 50 mm
The machine should be bolted to the floor.
Fixing materials for a floating screed floor are to be provided
on site.
Machine data Unit width 28“ 711 mm
Machine depth 42 13/16“ 1088 mm
Unit height 70 7/8“ 1800 mm
Casing width 27 7/8“ 708 mm
Casing depth 39 5/16“ 999 mm
Minimum width of delivery access to installation site 28 9/16“ 725 mm
Recommended rear wall gap (measured to front of machine) 59 1/16“ 1500 mm
Min. wall gap (to rear edge of lid) 19 11/16“ 500 mm
Net weight 306 lbs 139 kg
Dynamic floor load, max. 1584 N 1584 N
Average heat dissipation
(dependent on ambient room temperature and program
selected)
1615 BTU/h 473 W
Sound pressure level
(measured at a distance of 1 m from the machine and at a
height of 1.6 m)1 m
56 dB (A) 56 dB(A)
Installation should only be carried out by authorized installers in accordance with valid regulations!
Follow installation instructions when installing machine! All rights reserved!
Installation plan: PT 8303
Date: Jan-2015 Page: 12