Miele PT 7136, Инструкции по эксплуатации и монтажу

Страница: 18 / 60

Estimated time remaining
When a programme is selected the
estimated drying time will appear in the
display. Please be aware that it is only
an estimate!
The following factors all affect the
estimated time remaining: residual
moisture content after spinning; type of
fabric; size of load; room temperature;
fluctuations in power supply.
The electronics continually assess
conditions in the machine and adjust
the estimated time remaining for a more
accurate reading. Because of this the
time displayed can alter during the
course of a programme.
In the same way, the Woollens
handcare and Smoothing programmes
can finish earlier than expected if a
certain temperature is reached. This
can happen with particularly fine
fabrics or if items were partly dry
beforehand.
Before the end of a programme
There is a cooling down phase at the
end of the drying sequence:
Cooling
down will appear in the display. The
programme will not finish until the
cooling down phase has been
completed.
There is no cooling down phase at the
end of the following programmes:
Woollens hand care, Smoothing.
At the end of a programme
Anti-crease (if selected) and Finish will
appear in the display at the end of the
programme.
During the anti-crease phase (if
selected) the drum will turn at intervals
for an hour to help prevent creasing.
E
Remove the laundry
^
Press the
a
button to open the
door.
^
Remove the laundry.
Check that all items have been
removed from the drum. If items are
left in the dryer, they could be
damaged by overdrying when the
dryer is next used.
The drum lighting will come on when
the door is opened. It will go out a few
minutes later to save energy.
^
Close the door.
Maintenance after each drying
programme
^
Please see "Cleaning and care" for
details.
How to dry correctly
18