Miele PT 7135 C, Инструкции по эксплуатации и монтажу

Страница: 33 / 56

Problem Possible cause Remedy
The following
appears at the
end of the
programme:
Maintenance
message
Clean the heat
exchanger.
The dryer is reminding
you that heat exchanger
unit needs cleaning. – Clean the heat exchanger.
To delete the fault message:
– Confirm with OK .
You can adjust the setting
which controls when or if
the
Maintenance
message
appears.
– See "Settings menu
J
,
Cleaning the heat exchanger".
Clean the
airways
The dryer is not working
efficiently or
economically.
Possible causes: The fluff
filters are clogged with
fluff or with detergent
residues.
– Cleaning the fluff filters is
usually all that is required.
However, if the
Clean the
airways message does not go
out after you have cleaned
them, then also check all the
possible causes described
under "The drying process
goes on too long or even
switches off".
To delete the fault message:
– Confirm with OK .
You can adjust the setting which
controls when or if the message
Clean the airways
appears.
–
See "Settings menu
J
, Clean
the airways".
Drain fault
The drain hose is kinked. – Remove the kink.
To delete the fault message:
– Confirm with OK .
Problem solving guide
33