Cleaning the fluff filter
The fluff which is created by the drying
process is collected in the fluff filter in
the door. Clean the filter after
each
drying cycle
*
.
Cleaning the filter whilst dry
^
Open the door and pull the fluff filter
(1) out as illustrated.
^
Use your fingers or a vacuum cleaner
to remove the fluff from the surface of
the filter.
^
Remove any fluff from the hollow part
of the door opening. You could also
use a cleaning brush which is
available as an optional extra from
your Miele dealer or the Miele Spare
Parts Department, or use a vacuum
cleaner.
^
Also clean the door seal (2) with a
damp cloth.
Cleaning the filter with water
If there is a great deal of compacted
fluff on the filter, it can be removed
and cleaned under hot running
water.
^
Rinse the filter under hot, running
water.
^
Dry the filter carefully and thoroughly.
Replacing the filter
^
Once clean and dry, push the filter
back into the door holder until it
clicks into position. Ensure it is facing
the correct way.
^
Close the door.
,
*
The fluff filter should be
checked and cleaned regularly, but
always clean immediately if the
Clean out airways
message
appears.
Cleaning and care
35
