Settings menu
63
Module settings
We recommend connecting your dish-
washer to your WLAN network using
the MielePro@mobile app or via WPS.
If you would rather set up the connec-
tion to your router yourself, or you have
a special network configuration, you
can enter the relevant settings with the
necessary technical knowledge.
Start module activity
If you wish to reset all entered settings
and values for Miele@home, you can re-
store the standard settings on your
WLAN module. Any settings that do not
affect Miele@home will remain un-
changed.
Select
Default settings
and confirm
with
OK
.
Please wait
will appear in the display.
The message
Module status: Process suc-
cessful
will appear in the display after a
few minutes.
Confirm the message with
OK
.
The WLAN module factory default set-
tings have been restored.
If the factory default settings were not
restored to your WLAN module, repeat
the instructions above.
2nd interim rinse
You can increase the cleaning perfor-
mance in the case of stubborn soiling
by selecting a second interim rinse. This
function is not available for all programs
(see “Program guide”).
Select the setting you want and con-
firm with
OK
.
Brightness
There are seven different display bright-
ness settings.
Select the brightness you want and
confirm this with
OK
.