Switching on
^
Open the stopcock, if it is closed.
^
Open the door.
^
Make sure the spray arms are not
obstructed.
^
Switch the machine on with the
-
button.
The ECO programme (which is the
factory default programme) will appear
in the display for a short time and the
appropriate indicator light will come on.
After a short while, the estimated
duration for the programme will appear
in the display.
You can alter the setting of the
dishwasher so that the last programme
used will appear in the display when
the machine is switched on (see
"Settings menu, Pre-select prog.").
Selecting a programme
Choose your programme according to
the type of load and the degree of
soiling.
The different programmes and their
uses are described in the
Programme
chart
later on in this booklet.
^
Select the programme required with
the
X
button.
The indicator light next to the selected
programme will come on.
When the indicator light for the
4
symbol lights up you can use the
4
ü
button to select one of the further
programmes.
You can now select additional
functions (see "Additional functions").
Starting the programme
^
Start the programme by closing the
door.
The In-operation indicator light comes
on to show that a programme has
started.
If any additional functions are selected,
the appropriate indicators will also light
up.
A programme can only be cancelled
in the first few minutes. Otherwise
the programme must continue to the
end so that important programme
stages (e.g. reactivating the water
softener) are not omitted.
Operation
34
Содержание PG 8080
Страница 77: ...77 ...
Страница 78: ...78 ...
Страница 79: ...79 ...
Страница 80: ...M Nr 09 402 650 00 Alteration rights reserved Publication date 22 06 2012 ...