Operation
53
Program end
After a program has ended normally, the
Start/Stop
button's LED will
go out and the
button's LED will flash. The message
Program
finished
will appear in the bottom line of the display.
Universal
Temperature
Program finished
55 °C
In addition to this, an audible signal will sound for approx. 3 seconds
(factory default setting). To alter the audible signals, see “Settings
,
Volume”.
If the switch-off function is enabled, the Commercial Dishwasher
switches itself off after a short period of time.
Press the
button to switch it on again.
Turning off the dishwasher
Press the
button until the button's LED goes out.
Unloading the dishwasher
Dishes tend to break and chip more easily when they are hot. Allow
the dishes to cool until they are cool enough to handle before
unloading them.
The dishes will cool much faster if you open the door when the
program has ended.
First unload the lower basket, then the upper basket. This will prevent
water drops from the upper basket falling onto the dishes in the lower
basket.
