manualshive.com logo in svg

Miele PDR 300 HP SmartBiz, Инструкции по эксплуатации и монтажу, Страница: 49 / 76

Поделиться
Скачать
Miele PDR 300 HP SmartBiz Скачать руководство пользователя страница 49

Problem solving guide

49

Many malfunctions and faults that can occur in daily operation can be easily
remedied. Time and money will be saved because a service call will not be
needed.

The following guide may help you to find the reason for a malfunction or a fault,
and to correct it.

Indicator lights or information on the time display

Problem

Cause and remedy

The 

 indicator light

comes on at the end of
the programme.

The fluff filters are clogged with fluff.

Clean the fluff filters.

Clean the plinth filter.

See “Cleaning and care”.

To switch the 

 indicator light off:

Open and close the door (with the tumble dryer
switched on).

You can influence when the 

 indicator light comes

on: See “Programmable functions”, “



 Airways in-

dicator”.

The 

 indicator light

comes on after a pro-
gramme has been can-
celled and a signal
sounds.

The drain hose kinked.

Check the drain hose.

To switch the 

 indicator light off:

Open and close the door (with the tumble dryer
switched on).



 lights up

The programme selector has been moved.

Select the original programme. The time left will
appear in the display again.

Bars flash in the display
at the end of a pro-
gramme:



...



...



...

The programme has finished but the laundry has not
yet cooled down.

Either remove the laundry and spread it out to cool
down or leave it in the tumble dryer to cool down
during the cooling phase.

Содержание PDR 300 HP SmartBiz













































































Отзывы:

Нет отзывов