Miele Paragon Plus Скачать руководство пользователя страница 22

Страница: 22 / 68

Silks

cold to 30°C

Max. load 2.0 kg

Fabric

Silks and other handwashable fabrics with no wool content, e.g.
satin, lace and silk.

Note

Place socks, tights, bras etc. in a washing bag.

Express

cold to 40°C

Max. load 3.0 kg

Fabric

Small loads of items which require freshening up and which can be
washed in a

Cottons

programme.

Note

This programme can be used for rinsing individual items. Select the

cold

setting, and do not add any detergent.

Dark garments

cold to 40°C

Max. load 3.0 kg

Item

Dark garments made from cotton or mixed fibres.

Note

Wash inside out.

Shirts

cold to 60°C

Max. load 2.0 kg

Notes

– Pre-treat collars and cuffs if necessary.

– Wash silk garments in the

Silks

programme.

Denim

cold to 60°C

Max. load 3.0 kg

Notes

– Wash denim inside out.

– Denim often contains excess dye and will run during the first few

washes. Wash light and dark coloured items separately.

Drain/Spin

Max. load 6.0 kg

Notes

– Drain only: Select Without spin.

– Make sure you select the appropriate spin speed.

* Please note that the "buckets" represent garment care label symbols. See

"Garment care label symbols".

Programme chart

Содержание Paragon Plus





































































Результаты поиска

Содержание Paragon Plus

Отзывы:

Бренды по названию

Популярные бренды

Miele Paragon Plus, Руководство по эксплуатации

Результаты поиска

Содержание Paragon Plus

Отзывы:

Бренды по названию

Популярные бренды