The amount of water actually drawn up
into the oven may be less than the
amount specified as required, leaving a
small amount in the container.
^
Remove the water container after the
water intake process.
^
Confirm the message telling you that
the process is complete with "OK".
^
Close the door.
The message will then disappear.
You will hear the pump briefly as the
remaining water in the water intake pipe
is drawn into the oven.
After a short time a burst of steam is
injected automatically.
,
Danger of injury. Steam can
cause injury by scalding. Do not
open the appliance door while a
burst of steam is being injected.
Heat the empty oven for at least an
hour.
After at least an hour:
^
Switch the oven off.
After heating up for the first time
,
Danger of burning. Allow the
oven interior to cool down before
cleaning by hand.
^
Switch the oven on.
^
Take all accessories out of the oven
and clean them by hand (see
"Cleaning and care").
^
Clean the oven interior with a clean
sponge and a solution of hot water
and washing-up liquid or a damp
microfibre cloth.
^
Dry all surfaces with a soft cloth.
^
Switch the oven off.
Leave the oven door open until the
oven interior is completely dry.
Using for the first time
39
Содержание Oven
