Installation
*INSTALLATION*
20
Installing the microwave oven
For safety reasons, only use the
microwave oven when it has been
fully installed.
Securing the microwave oven in the
cabinet niche
The following items are supplied in the
accessory pack for installing the
appliance:
You only need to use one of the two
spacers (L) (depending on whether the
cabinet wall is 5/8" or 3/4" / 16 or
19 mm thick).
Attach the correct left-hand spacer
(L) applicable to the thickness of the
cabinet wall to one of the hooks
supplied.
Attach the other hook to the right-
hand spacer (R).
Before securing the hooks, make sure
that the screws are inserted where
the cabinet wall is at least
5/8" (16 mm) thick.
Draw a line on both sides of the
cabinet 16 9/16" (420 mm) above the
floor of the cabinet to mark the
distance between the bottom of the
cabinet and the lower edge of the
spacer.
Position the lower edge of the spacer
on this line and align the stopper at
the front of the spacer with the front
of the cabinet wall.
To secure the spacers and hooks,
place a screw in one of the front two
holes and another in the middle of the
long hole at the back.
The long hole allows the position to
be adjusted. The two additional holes
are in case additional screws are
required.
Slide the microwave oven into the
cabinet niche. Guide the power cord
through the cabinet niche with the
plug.