Miele KWT 6831 SG Скачать руководство пользователя страница 20

Страница: 20 / 64

Certain settings on the appliance can
only be selected in settings mode.

When in settings mode, the door
alarm is automatically deactivated.

Safety lock

The safety lock can be activated to
prevent:

– the appliance being switched off

inadvertently,

– inadvertent changing of temperature,
– Dynamic cooling being selected

inadvertently,

– the display lighting being

inadvertently switched on.

Activating or deactivating the lock

Touch the settings sensor.

All symbols available for selection
appear in the display and the

symbol

flashes.

Touch the OK sensor to confirm the
selection.

The last selected setting flashes and
the

symbol lights up in the display.

By touching the

sensor, you

can now select whether the safety
lock is activated or deactivated:

: the safety lock is deactivated

: the safety lock is activated.

Touch the OK sensor to confirm the
selection.

The selected setting is applied, the

symbol flashes.

Touch the settings sensor to leave
settings mode.
Otherwise the appliance exits
settings mode automatically after
approximately one minute.

The

symbol will appear in the

display when the lock is activated.

Selecting further settings

Содержание KWT 6831 SG

































































Результаты поиска

Содержание KWT 6831 SG

Отзывы:

Похожие инструкции для KWT 6831 SG

Бренды по названию

Популярные бренды

Miele KWT 6831 SG, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание KWT 6831 SG

Отзывы:

Похожие инструкции для KWT 6831 SG

Бренды по названию

Популярные бренды