Miele KWT 6112 iG ed/cs Скачать руководство пользователя страница 43

Страница: 43 / 64

Active AirClean filters

To confirm the filters have been
changed



Touch the settings sensor.

All symbols available for selection will
appear in the display and the



symbol

flashes.



Touch the sensors for setting the
temperature (





) repeatedly until

the



symbol flashes.



Touch the OK sensor to confirm your
selection.

The



will flash in the display (means:

Active AirClean filter is fitted in the ap-
pliance), the



symbol lights up.



Touch the symbols for setting the
temperature (





) repeatedly, until

the



symbol is displayed (means: the

counter has been reset).



Touch the OK sensor to confirm your
selection.

The selected setting is applied, the



symbol flashes.



Touch the settings sensor to leave
settings mode.
Otherwise the appliance exits set-
tings mode automatically after ap-
proximately one minute.

The



in the display goes out.

Содержание KWT 6112 iG ed/cs

































































Результаты поиска

Содержание KWT 6112 iG ed/cs

Отзывы:

Похожие инструкции для KWT 6112 iG ed/cs

Бренды по названию

Популярные бренды

Miele KWT 6112 iG ed/cs, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание KWT 6112 iG ed/cs

Отзывы:

Похожие инструкции для KWT 6112 iG ed/cs

Бренды по названию

Популярные бренды