Miele KS 28423 D ed/cs Скачать руководство пользователя

Страница: 25 / 88

Using Super cool

You can switch the Super cool



func-

tion on.

Super cool function



The Super cool function can be used to
rapidly reduce the temperature in the
refrigerator section to its lowest setting
(depending on the room temperature).

Tip:

Super cool is particularly recom-

mended for the rapid chilling of large
amounts of fresh food or drink.

When Super cool is switched on, the
appliance will work at full power to
lower the temperature in the appliance.

It switches itself off automatically after
approx. 12 hours.

Tip:

To save energy, you can switch the

Super cool function off yourself once
food and drinks are sufficiently chilled.

After switching Super cool off the appli-
ance reverts to working at normal
power.

Switching SuperCool on and
off



Touch the temperature display.

°C







SuperCool display

The current temperature and



appear

in the display.



Touch



– If



lights up orange, the function is

selected.

– If



lights up white, the function is

deselected.



Touch

to confirm your entry.



Or wait approximately 8 seconds
after the last touch of a button. The
setting will then be automatically ad-
opted.

The SuperCool function is switched on
or off.

Functions that are switched on are

not

displayed on the start screen.

After an interruption to the power sup-
ply, the SuperCool function will be
switched off if it was previously
switched on.

Displaying a selected function



Touch the temperature display.

The current temperature appears on the
display. The symbol for the selected
function lights up orange.

Содержание KS 28423 D ed/cs

























































































Результаты поиска

Содержание KS 28423 D ed/cs

Отзывы:

Похожие инструкции для KS 28423 D ed/cs

Бренды по названию

Популярные бренды

Miele KS 28423 D ed/cs, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание KS 28423 D ed/cs

Отзывы:

Похожие инструкции для KS 28423 D ed/cs

Бренды по названию

Популярные бренды