manualshive.com logo in svg

Miele KMDA 7633 FL, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele KMDA 7633 FL Скачать руководство пользователя страница 47

Additional functions

47

Wipe protection

The hob sensors can be locked for
20 s in order, for example, to remove
soiling. The 

 is not locked.

Activating

Touch the 

 sensor.

The time will count down in the timer
display.

Deactivating

Touch the 

 sensor until the timer

display goes out.

Demonstration mode

This function enables the hob to be
demonstrated in showrooms without
heating up.

Activating / Deactivating

Switch the hob on.

Touch the 0 sensor control on any of
the numerical keybanks.

Then touch the 0 and 2 sensors at
the same time for 6 seconds.

In the timer display, 



 flashes

alternately with 



 (demonstration mode

activated) or 



 (demonstration mode

deactivated) for a few seconds.

Displaying hob data

The model number and software
version of the hob can be displayed.
There must not be any pots or pans on
the hob.

Model designation

Switch the hob on.

Touch the 0 sensor control on any of
the numerical keybanks.

Then touch the 0 and 4 sensor
controls at the same time.

The timer display shows 2 numbers
flashing alternately:

Example: 



 flashing alternately with 



= KM 1234

Software version

Switch the hob on.

Touch the 0 sensor control on any of
the numerical keybanks.

Then touch the 0 and 3 sensor
controls at the same time.

Numbers appear in the timer display:

Example: 

:

 = Software version 2.00

Содержание KMDA 7633 FL





































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды