Miele KM 6564 FL Скачать руководство пользователя

Страница: 9 / 72

Warning and Safety instructions

Correct use



The hob gets hot when in use and remains hot for a while after

being switched off. There is a danger of burning until the residual
heat indicators go out.



Due to the high temperatures radiated, objects left near the hob

when it is in use could catch fire.
Do not use the hob to heat up the room.



Oil and fat can overheat and catch fire. Do not leave the hob

unattended when cooking with oil and fat. If it does ignite do not
attempt to put the flames out with water.
Disconnect the hob from the mains and use a suitable fire blanket,
saucepan lid, damp towel or similar to smother the flames.



Do not leave the hob unattended whilst it is being used. It should

be continually monitored whilst boiling and flash frying.



Flames could set the grease filters of a cooker hood on fire. Do

not flambé under a cooker hood.



Spray canisters, aerosols and other inflammable substances can

ignite when heated. Therefore do not store such items or substances
in a drawer under the hob. Cutlery inserts must be heat-resistant.



Do not heat an empty pan.



Do not heat up food in closed containers e.g. tins or sealed jars

on the hob, as pressure can build up in the container, causing it to
explode.



Do not cover the hob, e.g. with a hob cover, a cloth or protective

foil. The material could catch fire, shatter or melt if the hob is
switched on by mistake or if residual heat is still present.

Содержание KM 6564 FL









































































Результаты поиска

Содержание KM 6564 FL

Отзывы:

Похожие инструкции для KM 6564 FL

Бренды по названию

Популярные бренды

Miele KM 6564 FL, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание KM 6564 FL

Отзывы:

Похожие инструкции для KM 6564 FL

Бренды по названию

Популярные бренды