Miele KM 6325 Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 64

Miele KM 6325 Скачать руководство пользователя страница 40

Problem

Possible cause and remedy

The

ß

symbol flashes

alternately with

A

or with the

power setting selected in one
of the cooking zones.

There is no pan on the cooking zone, or the pan
is unsuitable.

^

Use a suitable pan (see "Pans").

After the hob is switched on "

LC

"

appears in the timer display for
a few seconds.

The system lock is activated.

^

Deactivate the system lock (see "Safety
features / System lock").

After the hob is switched on
"

dE

" appears in the display for a

few seconds.
The cooking zones do not heat
up.

Demonstration mode is activated.

^

Turn the rotary control for the front left
cooking zone anti-clockwise and hold.
Turn the rotary control for the front right
cooking zone twice briefly anti-clockwise,
then turn anti-clockwise and hold until

0000

appears in the display.

A cooking zone switches off
automatically.

It has been operated for too long.

^

You can use the cooking zone again by
switching it back on (see "Safety switch-off").

The Booster has deactivated
early automatically.

The overheating protection mechanism has
triggered.

^

See "Overheating protection".

The cooking zone is not
working in the usual way at the
power level set.

Power level 9 is automatically
reduced if you select power
level 9 on two linked cooking
zones or extended zones at the
same time.

Operating both zones at power level 9 would
exceed the permitted maximum power level for
the two zones.

^

Use a different cooking zone.

Problem solving guide

40

«
...
38
39
40
41
42
...
»

Содержание KM 6325

































































Отзывы:

Нет отзывов