manualshive.com logo in svg

Miele KM 6325-1, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele KM 6325-1 Скачать руководство пользователя страница 32

Safety features

32

Overheating protection

All the induction coils and cooling ele‐

ments for the electronics are fitted with

an overheating protection mechanism.

Before the induction coils or cooling el‐

ements get too hot, the overheating

protection mechanism cuts in in one of

the following ways:

– any booster function in operation will

be turned off.

– the set power level will be reduced,
– one or more cooking zones will

switch off automatically.

Turn the rotary controls for all the affec‐

ted cooking zones to "0". The affected

cooking zones can only be used again

as usual once the induction coil or cool‐

ing element has cooled down to a safe

level.
The overheating mechanism can be

triggered by:

– heating up an empty pan
– fat or oil being heated on a high pow‐

er level.

– insufficient ventilation of the under‐

side of the hob.

– a hot cooking zone being switched

on after an interruption to the power

supply.

If, despite removing the cause, the

overheating protection mechanism trig‐

gers again, contact Miele Service.

Содержание KM 6325-1





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды