manualshive.com logo in svg

Miele KM 6113, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele KM 6113 Скачать руководство пользователя страница 47

Problem solving guide

47

Problem

Cause and remedy

After switching on the
hob, 

 appears in the

front left cooking zone
display and 

 appears in

the front right cooking
zone display for a few
seconds.

The system lock or safety lock is activated.

Deactivate the system lock or safety lock (see
“System lock / Safety lock”).

After switching on the
hob, 

 appears in the

front left cooking zone
display and 

 appears in

the front right cooking
zone display for a few
seconds. The cooking
zones do not heat up.

The hob is in demonstration mode.

Deactivate demo mode (see “Programming”).

A cooking zone
switches off automatic-
ally.

It has been operated for too long.

You can use the cooking zone again by switching
it back on (see “Safety switch-off”).

A cooking zone or the
whole hob switches off
automatically.

The overheating protection mechanism has been ac-
tivated.

See “Safety features”.

The Booster has deac-
tivated early automatic-
ally.

The overheating protection mechanism has been ac-
tivated.

See “Safety features”.

The cooking zone is not
working in the usual
way on the power set-
ting selected.

The overheating protection mechanism has been ac-
tivated.

See “Safety features”.

Power level 9 is auto-
matically reduced if you
select power level 9 on
two linked cooking
zones at the same time.

Operating both zones at power level 9 would exceed
the permitted maximum power for the two zones.

Use a different cooking zone.

Содержание KM 6113













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды