Miele KM 6002, Инструкции по эксплуатации и монтажу

Страница: 35 / 44

Installation
35
Preparing the countertop

Create the countertop cut-out as
shown in the cooktop diagram.
Remember to maintain the minimum
safety distances (see "Safety
clearances").
Wooden countertop

Seal any cut surfaces on the wooden
countertop with a special varnish,
silicone rubber, or resin to prevent the
wood from swelling as a result of
moisture. The sealant must be
temperature-resistant.
Make sure that the sealant does not
get on countertop surface.
The sealing strip ensures that the
cooktop will sit securely in the cut-out
without slipping. Any gap between the
trim and countertop will become
smaller over time.
Wooden countertops

Position the spring clips

on the top
edge of the cut-out as shown in the
cooktop illustration.

Fasten the spring clips

using the
3.5 x 25 mm screws supplied with the
appliance.