Miele KM 5940 Скачать руководство пользователя страница 24

Страница: 24 / 48

Switching off and residual heat
indicators

To switch off a cooking zone

Touch the sensor switch for the
relevant cooking zone twice.

flashes in the cooking zone display

for a few seconds. If the cooking zone
is still hot, the residual heat indicator
will then appear in the display.

To switch off the hob

Touch the ON/OFF sensor

This switches off all cooking zones. The
residual heat indicator will appear in the
display of any cooking zone which is
still hot.

The lines of the residual heat indicator
go out one after another as the cooking
zones cool down. The last horizontal
line only goes out when the cooking
zone is safe to touch.

The residual heat indicators also
react to hot dishes and plates being
placed on a cooking zone that is not
switched on.

Do not touch any zone or place any
heat sensitive items on a zone where
the residual heat indicators are lit
up.
Danger of burning and fire hazard.

Use

Содержание KM 5940

















































Результаты поиска

Содержание KM 5940

Отзывы:

Бренды по названию

Популярные бренды

Miele KM 5940, Руководство по эксплуатации и установке

Результаты поиска

Содержание KM 5940

Отзывы:

Бренды по названию

Популярные бренды