manualshive.com logo in svg

Miele KM 5840, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele KM 5840 Скачать руководство пользователя страница 39

Safety features

39

Safety shut-off

Excessive operating time

The safety shut-off mechanism is trig-
gered automatically if a cooking zone is
heated for an unusually long period of
time. This time depends on the power
level selected. If the time has been ex-
ceeded, the cooking zone turns off and
the residual-heat indicator appears. If
you turn the cooking zone off and on
again, it will be ready for operation
again.

Safety shut-off if the sensors are
covered

Your cooktop will turn off automatically
if one or several of the sensors remain
covered for longer than 10 seconds, for
example, by finger contact, food boiling
over or by an object such as an oven
glove or tea towel. 

 flashes in the timer

display and a buzzer sounds every
30 seconds for 10 minutes.
When you remove the objects or soil-
ing, 

 goes out, the buzzer goes off,

and the cooktop is ready for operation
again.

Содержание KM 5840





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды