Miele KM 5731, Инструкция по эксплуатации и установке

Страница: 37 / 72

Overheating protection
All of the induction coils and the cooling
element for the electronics are fitted
with an overheating protection
mechanism. To prevent the induction
coils and cooling element from
overheating, the overheating protection
mechanism works on the affected
cooking zone or on the entire hob in the
following ways:
– If the booster function is being used,
this will be switched off.
– The power level will be reduced.
– If an induction coil is affected, the
hob will switch off. The
FE99
fault
message will be displayed.
The cooking zone can be used again
as soon as it has cooled down to a safe
level.
– If the cooling element is affected, the
power supply to the cooking zones
will be reduced, and the set power
level will continue to be displayed.
As soon as the cooling element has
cooled down sufficiently, the cooking
zones will automatically continue to
operate at the original power setting.
Overheating can be caused by:
– heating up an empty pan
– fats or oils being heated up on the
highest power setting.
– there being insufficient ventilation to
the under side of the appliance.
If the overheating protection
mechanism triggers again, contact the
Service department.
Safety features
37