manualshive.com logo in svg

Miele KM 5621, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele KM 5621 Скачать руководство пользователя страница 39

Installation

*INSTALLATION*

39

Installation notes

Seal between cooktop and counter-
top

Damage caused by incorrect in-

stallation.
Using sealant under the cooktop
could result in damage to the cook-
top and the countertop if the cook-
top ever needs to be removed for
servicing.
Do not use sealant between the
cooktop and the countertop.
The sealing strip under the edge of
the cooktop provides a sufficient seal
for the countertop.

Sealing strip

Dismantling the cooktop for service
purposes may damage the sealing
strip underneath the edge of the
cooktop.
Always replace the sealing strip be-
fore reinstalling the cooktop.

Tiled countertop

Grout lines 

 and the shaded area un-

der the cooktop frame must be smooth
and even. If they are not, the cooktop
will not sit flush with the countertop and
the sealing strip underneath the cook-
top will not provide a good seal be-
tween the cooktop and the countertop.

Содержание KM 5621





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды