Miele KM 406, Руководство по эксплуатации

Страница: 13 / 28

Switching on, Switching off,
Control
The control is used to switch on the
burner and regulate the strength of the
flame.
To switch on:
^
Press in the control and then turn
anti-clockwise to the large flame
symbol.
^
When the flame ignites, keep the
control pressed in for 8-10 seconds,
and then let it go.
If the flame goes out, repeat the
procedure, keeping the control pressed
in for a few extra seconds.
To regulate the burner setting:
^
To turn the heat down from a high to
a low setting turn the control
anti-clockwise until there is a
resistance. Briefly press to turn past
the resistance. Then without pressing
it in turn the control to the required
setting.
^
To turn the heat up from a low to a
high setting, turn the control
clockwise until there is a resistance.
Briefly press to turn past the
resistance. Then without pressing it in
turn the control to the required
setting.
To switch off:
^
Turn the control clockwise until "
ß
" is
reached.
This stops the flow of gas and the flame
goes out.
Remember: Turn anti-clockwise to
switch on, turn clockwise to switch
off.
Stop when you feel a resistance. Do
not try to force the control further.
The control cannot be turned
anti-clockwise from the small flame
symbol to the "
ß
" position.
Using the gas hob
13