To avoid the risk of accidents and
damage to the appliance, please
read these instructions carefully
before using it for the first time. They
contain important notes on its
installation, safety, use and
maintenance.
The use of the appliance by the
elderly or infirm or those who have
not used the appliance before
should be supervised by a
competent and responsible person
to avoid the risk of injury.
A data plate for your appliance is
supplied with this documentation. It
should be stuck into the space
provided at the end of the instruction
book.
Keep these instructions in a safe
place for reference, and pass them
on to any future user.
Installation and connection
The connection to the gas supply
must be carried out by a suitably
qualified and competent person in strict
accordance with current local and
national safety regulations, e.g. a Corgi
registered service technician in the
U.K. If the appliance is supplied without
a plug, or if the plug is removed, it must
be connected to the mains electricity
supply by a suitably qualified and
competent electrician.
The manufacturer cannot be held liable
for damage caused by incorrect
installation or connection.
The electrical safety of this
appliance can only be guaranteed
when continuity is complete between it
and an effective earthing system which
complies with current local and national
safety regulations. It is most important
that this basic safety requirement is
present and tested regularly, and where
there is any doubt, the household
wiring system should be inspected by a
qualified electrician. The manufacturer
cannot be held liable for the
consequences of an inadequate
earthing system (e.g. electric shock).
Ensure that the gas pipe and
electrical cable are installed in
such a way that they do not touch any
parts of the appliance which become
hot. This could cause damage.
Do not connect the appliance to
the mains electrical supply by an
extension lead. Extension leads do not
guarantee the required safety of the
appliance (e.g. danger of overheating).
This equipment may only be used
in mobile installations such as
ships, caravans, aircraft etc. if a risk
assessment of the installation has been
carried out by a suitably qualified
engineer.
Warning and Safety instructions
7
Содержание KM 390 G
Страница 30: ...30 ...
Страница 31: ...31 ...
Страница 32: ...Alteration rights reserved 0407 M Nr 05 827 480 07 en ...