Miele KFNS 3917 S ed, Инструкция по эксплуатации и установке

Страница: 17 / 40

Temperature display
During normal operation, the
temperature display on the control
panel shows the average temperature
in the refrigerator section.
If the temperature is not within the
range that the appliance is able to
display (0 °C to 19 °C), bars will flash in
the temperature display.
The temperature display will flash , if
– a different temperature is being set,
– the temperature in the appliance has
risen by several degrees, indicating
that the appliance is warming up too
much.
This loss of coldness is no cause for
concern if it is due to the door being left
open for a while, e.g. for removing or
storing a large amount of food.
Temperature display brightness
The appliance is supplied with the
brightness of the temperature display
set as low as possible. However, if the
door is opened, a setting changed or if
the alarm is sounding, the temperature
display will appear much brighter for
approx. 1 minute.
You can adjust the level of brightness:
^
Press and hold the Super cool button
pressed in for approx. 5 seconds.
The Super cool indicator light flashes
and a
;
flashes in the temperature
display.
^
Press one of the temperature selector
buttons repeatedly until an
^
appears
in the display.
^
Press the Super cool button again.
^
lights up in the temperature display.
^
You can now adjust the level of
brightness by pressing the
temperature selector buttons. You
can choose from settings
1
to
5
:
1
: lowest setting,
5
: brightest setting.
^
Press the Super cool button to save
the setting.
^
Press the On/Off button to come out
of the setting mode.
Otherwise the electronics will revert to
normal operation after a couple of
minutes.
The correct temperature
17