Miele KFNS 37232 iD Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 76

background image

~

The more coolant there is in an appliance, the larger the room it

should be installed in. In the event of a leakage, if the appliance is in
a small room, there is the danger of combustible gases building up.
For every 8 g of coolant at least 1 m

3

of room space is required. The

amount of coolant in the appliance is stated on the data plate inside
the appliance.

~

To avoid the risk of damage to the appliance, make sure that the

connection data (fuse rating, frequency and voltage) on the data
plate corresponds to the household supply.
Check that this is the case before connecting the appliance. Consult
a qualified electrician if in any doubt.

~

The electrical safety of this appliance can only be guaranteed

when it is correctly earthed. It is essential that this standard safety
requirement is met. If in any doubt, please have the electrical
installation tested by a qualified electrician.

~

If the electrical connection cable is faulty it must only be replaced

by a Miele approved service technician to protect the user from
danger.

~

Do not connect the appliance to the mains electrical supply by a

multi-socket adapter or extension lead. These are a fire hazard and
do not guarantee the required safety of the appliance.

~

Do not use in a damp or wet environment (e.g. garage or utility

room). Moisture could reach live components or the electrical
connection and cause a short circuit.

~

This appliance must not be used in a non-stationary location (e.g.

on a ship).

~

A damaged appliance can be dangerous. Check the appliance

for visible signs of damage. Do not use a damaged appliance.

~

For safety reasons, this appliance may only be used when it has

been built in.

Warning and Safety instructions

11

«
...
9
10
11
12
13
...
»

Содержание KFNS 37232 iD













































































Отзывы:

Нет отзывов

Похожие инструкции для KFNS 37232 iD

Бренд: Oster Страницы: 26

Бренд: Hanseatic Страницы: 52

Бренд: NEFF Страницы: 36

Бренд: COOLFORT Страницы: 32

Бренд: Vestfrost Страницы: 76

Бренд: Burg Страницы: 64

Бренд: Grundig Страницы: 116

Бренд: Sub-Zero Страницы: 2

Бренд: CDA Страницы: 20

Бренд: Frigidaire Страницы: 7

Бренд: Frigidaire Страницы: 7

Бренд: Whirlpool Страницы: 10

Бренд: Whirlpool Страницы: 11

Бренд: Whirlpool Страницы: 14

Бренд: Iceking Страницы: 16

Бренд: Iceking Страницы: 20

Бренд: Currys Essentials Страницы: 16

Бренд: Currys Essentials Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды