The air vents must not be covered or
blocked in any way.
They should be dusted on a regular
basis.
Before installation
^
Before installation, remove the cover
strip, sealing strip and other
accessories from inside the appliance
and from the external rear wall of the
appliance.
^
On no account should the spacers
be removed from the back of the
appliance. These ensure the gap
required between the back of the
appliance and the wall is maintained.
^
Remove any cable clips from the
back of the appliance.
^
Remove the red transit bars
a
and
seal the resulting holes with the caps
b
supplied.
^
Check that all parts at the back of the
appliance are unhindered. Carefully
remove any hindrance.
Did your old appliance have a
different hinging mechanism?
If your old appliance had a different
type of hinging, the furniture door can
still be used. Remove the old hinges
from the housing unit. They are no
longer required because the furniture
door is now fitted to the appliance door.
All the necessary parts are supplied or
can be ordered from Miele.
Installation advice
50
Содержание KFN 9755 IDE
