^
Using flat-nosed pliers carefully pull
the insert out together with the entire
cable loop.
Do
not
pull on the cable to remove
the insert - you could damage it!
^
Remove the stoppers and replace
them on the opposite side.
^
Replace the cable loop and insert on
the opposite side.
^
Screw the insert securely into
position.
^
Fit the covers back onto both sides.
Cover
A
(marked on the underside of
the cover)
goes on the side with the
cable
, Cover
B on the other side
!
^
Push the bearing bush securely into
position until there is almost no gap
between it and the top of the door.
Refitting the appliance doors:
^
Fit the stoppers into the top of the
freezer section door.
^
Hang the lower door on hinge pin
j
and then close the appliance door.
^
Fit lower hinge bracket
b
in the door
bearing bush of the lower door. Then
screw it securely to the housing.
^
Refit cover
a
.
^
Fit the top appliance door onto
middle hinge pin
j
.
^
Open the door.
Changing the door hinging
55
