^
Push short trim
p
into the gap at the
top. Make sure that the gap in the
trim faces the front. The trim must sit
flush with the top of the appliances at
the front.
^
Fit cover
q
in the space between the
control panels. Make sure that the
outer edges of the cover are flush
with the control panels. The cover
can be pulled out to adjust it to the
right size.
The gap in the cover must face
downwards to fit properly over the
stainless steel trim.
^
Break off thin tags
r
from plinth
facings
a
. Important: Make sure you
remove these from the correct side -
i.e. from the handle side of the
appliances.
^
Refit plinth facings , pushing firmly
into position.
^
Refit covers
b
.
Installing in a side-by-side combination
49
Содержание KFN 8701 SE ed-1
Страница 55: ...55 ...
Страница 56: ...Alteration rights reserved 5105 KFN 8701 SE ed 1 M Nr 06 785 520 00 en GB M Nr 06 785 520 00 ...