Changing the door hinging
103
Refitting the upper door
Place upper door
onto middle
hinge pin
and guide the upper
opening on the hinge side of the door
onto the door hinge with the bearing
bush.
Use your fingers to insert bolt
into
the door bearing bush.
Screw in bolt
(by approx. ¼ turn)
until it clicks into position.
Fit safety cover
on to the pin.
The appliance door is not secure until
safety cover
has been correctly fit-
ted.
Fit holder with the cable connected to
it into the opening: the tab with the
longer opening must face forwards.
Press the holder downwards until the
tab engages.
Connect the cable to the upper
door hinge
Guide cable
above the door hinge,
and insert plug
.
Lay cable strands
into their router.
Carefully lay grey cable
into its
router above the hinge.
