Problem solving guide
50
Display warnings
Message
Cause and remedy
The alarm symbol
and the temperature
display are flashing.
The
temperature alarm
has been activated (see
“Temperature and door alarm”). The temperature in
the freezer section has risen higher or fallen lower
than the temperature set.
This could be due to, for example:
– the door being opened too frequently,
– a large quantity of fresh food being placed in the
freezer at once without switching on the Super
freeze function.
– a lengthy interruption to the power supply.
Rectify the cause of the alarm.
The alarm will stop and the alarm symbol
will go
out when the temperature reaches the correct level
again.
Depending on the temperature displayed, you
should check whether food in the freezer has
started to thaw or has defrosted. If it has, it should
be used as soon as possible. Defrosted food may
only be re-frozen after it has been cooked.
“
F0
to
F9
” appears in
the display.
There is a fault.
Call the Miele Service Department.
The
symbol lights up
in the display, the
appliance does not get
cold, although the
controls and the interior
lighting are working.
Demo mode is switched on. This allows the appliance
to be presented in the showroom without the cooling
system being switched on. Do not activate this setting
for domestic use.
Contact the Miele Service Department for
information on deactivating Demo mode.