Switching on and off
23
Operating the appliance
A light touch of the finger on the
sensors is all that is required to operate
this appliance.
Switching on
The freezer section and the refrigerator
section can be switched on at the same
time using the two On/Off controls.
To enable the temperature to get suffi-
ciently cold inside the appliance, allow
the appliance to run for approx.
3-5 hours (depending on ambient tem-
perature) before placing food in it.
Do not place food in the freezer until it
has reached the required coldness (at
least -18 °C).
Touch one of the two
On/Off con-
trols until the temperature display
lights up.
The appliance will be switched on and
the interior lighting will come on in the
refrigerator section.
The temperature display for the refriger-
ator section indicates the temperature
in the refrigerator section.
– If the temperature in the freezer sec-
tion is above 0 °C, dashes will flash in
the temperature display for the
freezer section.
– As soon as the temperature drops
below 0 °C the temperature in the
freezer section will flash in the dis-
play.
– The
display LED will flash until the
set temperature has been reached in
the freezer section.
The appliance will gradually reach the
pre-set temperatures:
– Temperature in the refrigerator sec-
tion = 2 °C
– Temperature in the freezer sec-
tion =-18 °C
